NXP Semiconductors
UM10699
User manual for SPI-bus RTC demoboard OM11059UL
UM10699
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2020. All rights reserved.
User manual
Rev. 3 — 18 August 2020
12 / 16
6 OM11059UL Board FCC-CE EMC Position
Author: Jim Hornig, Board Solutions Compliance Engineer, NXP Semiconductors, 8 July
2020
Scope
This documents NXP Semiconductors' position regarding the applicability of FCC and CE
EMC requirements on the OM11059UL board.
Applicability
This document applies only to the OM11059UL board as defined by the documents in
Agile for the Marketing PN OM11059UL.
Product Description
The OM11059UL board consists of a custom Printed Circuit Board (PCB), passive
components (capacitors, resistors), pin headers/connectors for external connection, and
the associated PCF85063BTL tiny Real-Time Clock/calendar with alarm function and
SPI‑bus.
The boards require an external power source.
When power is applied to the board(s), the PCF85063BTL device will power-up to a
quiescent no-operative state as there is no Micro-Controller Unit (MCU) to operate the
device. As such, the OM11059UL board is considered non- functional.
The purpose of the board is to allow customers to evaluate function of the PCF85063BTL
device based on how the customer manipulates the inputs on the board.
Overview and Position
Based on our review of the documentation in Agile for OM11059UL; the OM11059UL
board is considered a non- functional component. Since it is non-functional as sold, it is
considered a component from an FCC and CE perspective and formal testing does not
apply.
Marking and Documentation Requirements
From a legal perspective, the following requirements apply:
User Guide
The following text needs to be included in the OM11059UL user guide:
This product has not undergone formal EU EMC assessment. As a component
used in a research environment, it will be the responsibility of the user to ensure the
finished assembly does not cause undue interference when used and cannot be CE
marked unless assessed.
Product Packaging
The outside of the OM11059UL box must be labeled with 805-77385 the following text:
For evaluation only; not FCC approved for resale
An insert 926-78954 with the following text needs to be included with the OM11059UL
board:
FCC NOTICE: This kit is designed to allow:
(1) Product developers to evaluate electronic components, circuitry, or software
associated with the kit to determine whether to incorporate such items in a finished
product and