www.nxp.com
5
STEP-BY-STEP INSTRUCTIONS
This section covers software download,
development kit setup, and application
control.
1
Download
Software
Download installation software
and documentation
at
.
2
Download Necessary
Drivers
Install the FT230x virtual COM port driver.
Visit ftdichip.com/drivers/vcp.htm to
download the correct driver. Select the
virtual COM port (VCP) driver based on
your operating system and processor
architecture.
3
Install
FTDI Driver
Go to the Device Manager and right-
click the COM port detected and select
Update Driver Software.
Select Browse my computer for driver
software and select the FTDI driver that
has been downloaded.
Restart your machine.
4
Connect the
power supply
Connect power supply to power socket
and micro USB cable to micro USB port
on the Development board. Turn on the
Power Switch. Make sure the status LEDs
D14, D15 and D16 for voltage levels 3.3V,
5V and 1.25V respectively are glowing on
the board.