manualshive.com logo in svg

NXP Semiconductors MPC5644A, Справочное руководство, Страница: 934 / 1735

Поделиться
Скачать
NXP Semiconductors MPC5644A Скачать руководство пользователя страница 934

Enhanced Time Processing Unit (eTPU2)

MPC5644A Microcontroller Reference Manual, Rev. 6

934

Freescale Semiconductor

 

Microinstructions with fields ABSE and ABDE

In microinstructions where ABSE and ABDE fields are available (1 bit each), ABSE controls register set 
selection for T4ABS and ABDE controls register set selection for T2ABD. 

Table 24-78

 shows the 

meaning of values for ABSE and ABDE fields.

   

Microinstructions Without Fields ABSE and ABDE

When ABSE and ABDE are not available in a microinstruction format, register set is selected by T4BBS 
field. 

Table 24-79

 explains how to select a register set either for T4ABS and T2ABD.

24.5.9.2.2

Selecting sources and destination

All ALU/MDU operations need two sources (called AS and BS) and one destination (called AD), except 
for some of those that use immediate data (see 

Section 24.5.9.2.11, Operations with immediate data

). 

Fields T4ABS (4 bits), ABSE (1 bit), T4BBS (3 bits) select sources, while T2ABD (4 bits) and ABDE (1 
bit) select the destination. When MDU is used (multiply/divide), T2ABD destination selection is ignored 
and results are stored in MACH and MACL (see 

Section 24.5.8.3, MAC and Divide Unit (MDU)

). ABSE 

and ABDE are not available in some microinstruction formats that support ALU/MDU operations. 
However, in all formats where ABSE is available, ABDE is also available and vice-versa. The existence 
of ABSE/ABDE fields changes the meaning of T4BBS field, as shown in 

Table 24-80

. On instructions 

with immediate data, it is used as B-source (see 

Section 24.5.9.2.11, Operations with immediate data

).

All sources and destinations have a size associated to them, and these sizes are used to select flag sample 
position (see 

Section 24.5.9.2.3, Flags sampling control

). Sizes can be 8, 16 or 24 bits. Registers that are 

not exactly of one of these sizes are treated as the immediately upper size (e.g., CHAN[4:0] is an 8-bit 
source). See 

Section 24.5.9.2.3, Flags sampling control

, for more information.

Table 24-78. Register Set Selection by ABSE or ABDE

ABSE or ABDE

Register set selected

0

second

1

first

Table 24-79. Register set selection by T4BBS w/o ABSE, ABDE

T4BBS

Register set for T2ABD

Register set for T4ABS

0xx

first

first

100

second

second

101

second

first

110

first

second

111

first

first

none

1

1

Refers to operations with immediate data as B-source, without ABSE, ABDE.

first

first

Содержание MPC5644A








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов