LPC2468 IRD Kit 1.2 Quick Start Guide, rev. 1.0
Page 8 of 8
2
IRD +3.3V Supply
IRD +3.3VDC Supply
3
POE_3.3V
POE Connector 3.3VDC Supply
JP19 – 5.0VDC Source Selection
Pin Label
Function
1
+5.0VDC
JPWR +5VDC Source (from Condor External Power
Supply)
2
IRD +5.0VDC Supply
IRD +5VDC Supply
3
POE_5V
POE Connector 5.0VDC Supply
12V – POE 12VDC Output Connection
Pin Label
Function
1
POE_12V
POE Connector 12VDC supply connection
2 GND
Ground
connection
JP2 – IRD Current Monitor Connection
Pin Label
Function
1
IRD +3.3V Supply
IRD 3.3VDC Source Power
2
+3V3
3.3V IRD Supply Line
J_VDISP – IRD Display Power Source Selection
Pin Label
Function
1
IRD +3V3
3.3V IRD Supply Line
2
VFD/LCD VCC
VFD &LCD Display Supply Source
3
IRD +5.0VDC
IRD +5VDC Supply
J_LCD – LCD Contrast Control Selection
Pin Label
Function
1
V_Contrast
Contrast voltage from VR2
2
LCD_Contrast LCD Contrast Voltage V0
VREF – Microcontroller VREF Selection
Pin Label
Function
1
VREF
ADC/DAC reference voltage signal to MCU
2
V3A
Filtered 3.3v source for VREF
7.0 Support
Online technical support is available at
http://www.nxp.com/support
Manuals and Datasheets:
http://www.standardics.nxp.com/support/boards/ird/
©2008 NXP Semiconductors. All rights reserved. All trademarks are the property of their respective owners.
The information supplied by NXP Semiconductors. is believed to be accurate and reliable, but in no event shall
NXP Semiconductors be liable for any damages whatsoever arising out of the use or inability to use the
information or any errors that may appear in this publication. The information is provided as is without any
warranties of any kind, either express or implied. NXP Semiconductors reserves the right, without notice, to
make changes to the information or to the design and specifications of its hardware and/or software products.
Products subject to availability.
NXP Semiconductors
San Jose, CA
USA
www.nxp.com