Build the Platform
Build a Demo Platform: Assemble 2 Boards
23
i.MX31 3-Stack Development Kit Quick Start Guide
Connect Power Supply; Run Preloaded
Demo
Figure 3.6 Connect Personality Board to Power Supply
1. Connect the regulated 5V power supply to the appropriate power adapter. Plug the 5V
line into the J12 (5V POWER JACK) connector on the Personality board. See
Figure
3.6
. Turn the 5V power supply ON.
2. The OS image pre-loaded in the 3-Stack should boot and the Linux operating system
should appear at the Personality board’s LCD display.
CPU/Personality Board
DC
power
Reg5V
DC Supply
J12 power jack is on the underside
of the Personality board
1
2
3StackQS_Linuxbeta.book Page 23 Wednesday, January 16, 2008 1:58 PM
Содержание i.MX31
Страница 1: ...i MX31 3 Stack Development Kit Quick Start Guide for Linux...
Страница 14: ...About the Boards Personality Board 12 i MX31 3 Stack Quick Start Guide for Linux...
Страница 26: ...Build the Platform Build a Demo Platform Assemble 2 Boards 24 i MX31 3 Stack Development Kit Quick Start Guide...
Страница 36: ...i MX31 3 Stack Development Kit Quick Start Guide PN 926 23573 Rev B...