www.nxp.com/iMX8MPLUSPEVK
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their
respective owners. The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by NXP Semiconductors is under license. Windows is a registered trademark of the
Microsoft Corporation. Arm and Cortex are trademarks or registered trademarks of Arm Limited (or its subsidiaries)
in the US and/or elsewhere. The related technology may be protected by any or all of patents, copyrights, designs
and trade secrets. All rights reserved. © 2021 NXP B.V.
Document Number: 8MPLUSEVKPQSG REV 0
Agile Number: 926-48283 REV A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
The following information is provided per Article 10.8 of the Radio Equipment Directive 2014/53/EU:
(a) Frequency bands in which the equipment operates.
(b) The maximum RF power transmitted.
PN
RF TECHNOLOGY
(A) FREQ RANGES (EU)
(B) MAX TRANSMITTED POWER
8MPLUSLPD4-
PEVK
WLAN 2.4 GHz Mode 802.11b/g/n
2412 MHz – 2472 MHz
18.5 dBm
WLAN 5 GHz Mode 802.11a/n/ac
5180 MHz – 5825 MHz
15 dBm
BLE
2402 MHz – 2480 MHz
4 dBm
Bluetooth BR/EDR
2402 MHz – 2480 MHz
4 dBm
EUROPEAN DECLARATION OF CONFORMITY (Simplified DoC per Article 10.9 of the Radio Equipment Directive 2014/53/EU)
This apparatus, namely 8MPLUSD4-PEVK, conforms to the Radio Equipment Directive 2014/53/EU.
The full EU Declaration of Conformity for this apparatus can be found at this location:
www.nxp.com/iMX8MPLUS