Distributor of NXP Semiconductors: Excellent Integrated System Limited
Datasheet of MCIMX6SLEVK - KIT EVAL MCIMX6SL
Contact us: [email protected] Website: www.integrated-circuit.com
Quick Start Guide
6
1
Insert SD
Card
Insert the supplied SD card into the
SD2 card slot.
2
Set Up Boot
Switches
By default, boot switches are configured
to boot from SD2. If any other boot
source is desired, boot switches have
to be configured according to Table 1.
3
Connect USB to
UART Cable
Connect from USB to UART port (J26)
using a micro USB cable to PC. Once
the PC recognizes the virtual USB to
UART device, it can be seen it in your
PC Device Manager list.
Serial port configuration: 115.2 Kbaud,
8 data bits, 1 stop bit, no parity.
Note: The PC needs a driver to enable
a virtual COM port through the PC USB
port.
Visit
ftdichip.com/drivers/vcp.htm
to
download the correct driver.
4
Connect EPDC or
Parallel Display
Connect by means of the
IMXEBOOKDC3-E board, which has to
be connected to J12 and J13. For more
information about this board, please visit
www.nxp.com
.
5
Connect
Power Display
Connect 5 V power supply into power jack
J6 and set SW14 to the On position.
SETTING UP THE BOARD
7 / 13
7 / 13