NXP Semiconductors Freescale KIT33905, Руководство пользователя, Страница: 14 / 22

KIT33905 Evaluation Boards , Rev. 2.0
14 Freescale Semiconductor
Using the EVB
7.1.3 Sending Commands to Acquire the Configuration of the SBC
Device Status and
Flags sections
Device Status decoded
Adds command
to
Sequential Mode
sequence
Adds all commands on
tab to
Sequential Mode
sequence
Read device status and
enabled functionality Read Device Mode – keeps
SAFE functionality and exits
DEBUG Mode (overrides
hardware configuration)
Figure 7. SPIGen Graphical User Interface (Commands and Device Configuration)
1. In the Registers and Flags tab, click Register address low (b7=0) sub tab as shown in Figure 7 .
2. Click any of the read device flag status options.
3. Click SEQ to add commands to the Sequential Mode window.