8
EXTERNAL USE
Step-by-Step Installation Instructions
1
Install Software and Tools
Install CodeWarrior Development
Studio for S12 V5.1 or later.
CodeWarrior Dev Tools for HCS12(X)
MCUs
2
Connect the USB Cable
Connect one end of the USB cable to the PC and the other end to
the mini-B connector on the DEVKIT-S12G128 board. Allow the PC
to automatically configure the USB drivers if needed.
3
Using the Example Project
The pre-loaded example project utilizes the RGB LED. Once the
board is plugged in you can see how the RGB LEDs change the
color.
4
Learn More About the S12G128
Read the release notes and documentation on the
nxp.com/S12G128.
• The Processor Expert graphical initialization software included in
your CodeWarrior installation will help reduce your time to
market
• CodeWarrior for S12 with examples
In this quick start guide,
you will learn how to set
up the
DEVKIT-S12G128
board and run the default
exercise.