Copyright © 2007 SofTec Microsystems
®
DC01492
Trademarks
SofTec Microsystems is a registered trademark of SofTec Microsystems.
Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation.
PC is a registered trademark of International Business Machines Corporation.
Other products and company names listed are trademarks or trade names of their respective companies.
To install the required components, do the following:
1.
Insert the SofTec Microsystems
“System Software”
CD-ROM into your computer’s CD-ROM drive. A startup
window will automatically appear.
2. Choose
“Install Instrument Software”
from the main menu.
3.
Click on the
“Copy SofTec Microsystems DLL to \CodeWarrior for Microcontrollers V6.1\prog\gdi”
option.
An Explorer window will open. Copy the
“inDART_RS08.dll”
file to your PC in the
“\CodeWarrior for
Microcontrollers V6.1\prog\gdi”
folder, relative to the CodeWarrior installation path.
4.
Click on the
“Copy examples for CW08 V6.1”
option. An Explorer window will open. Copy the
“DEMO9RS08KA8”
folder to your PC, in a location of your choice. These are the examples specific for the
demonstration board, and will be used later in the step-by-step tutorial.
Note:
to install the Additional Components on Windows 2000 or Windows XP, you must log in as Administrator.
First Connection with the PC
Note:
before to connect the board to the PC, it is important that you install the required system software as
described in the previous section.
The Evaluation Board connects to a host PC through a USB port. Connection steps are listed below in the
recommended flow order:
1.
Install all the required system software as described in the previous section.
2.
Make sure the “POWER SEL” jumper is in the “USB” position.
3.
Insert one end of the USB cable into a free USB port.
4.
Insert the other end of the USB cable into the USB connector on the Demonstration Board.
5.
The first time the Demonstration Board is connected to the PC, Windows recognizes the instrument and starts
the
“Found New Hardware Wizard”
procedure, asking you to specify the driver to use for the instrument.
Follow the wizard steps, choosing to install the software automatically when requested.
The Evaluation Board’s USB driver is now installed on your system.
Step-By-Step Tutorial
1.
Make sure that the “POWER SEL” jumper selects the “USB” position.
2.
Ensure that the Demonstration Board is connected to the PC (via the USB cable) and that the board is powered.
3.
Start CodeWarrior by selecting it in the Windows Start menu.
4.
From the CodeWarrior main menu, choose
“File > Open”
and choose the
“DEMO9RS08KA8\C\Demo\Demo.mcp”
file. This is the board example you copied from the SofTec
Microsystems
“System Software”
CD-ROM.
5. Click
“Open”
. The
Project
window will open.
6.
The C code of this example is contained in the
“main.c”
file. Double click on it to open it.
7.
From the main menu, choose
“Project > Debug”
. This will compile the source code, generate an executable file
and download it to the demo board.
8.
A new debugger environment will open. From the main menu, choose
“Run > Start/Continue”
. The program
will be executed in real-time.
9.
From the main menu, choose
“Run > Halt”
. The program execution will stop. The next instruction to be
executed is highlighted in the
Source
window.
10. From the main menu, choose
“Run > Single Step”
. The instruction highlighted in the
Source
window will be
executed, and the program execution will be stopped immediately after.
11. From the main menu, choose
“Run > Start/Continue”
. The application will restart from where it was previously
stopped.