NXP Semiconductors BATT-14AAAPACK, Руководство пользователя

Страница: 10 / 16

Configuring the Hardware
BATT-14AAAPACKUG Rev. 1.0
10 Freescale Semiconductor, Inc.
5.2 Cell Configuration
The battery pack allows you to configure from three to six cells when used with the MC33772 and from seven to fourteen cells when used
with the MC33771. The exact number of required cells depends on the device version. You may need to place AAA dummy batteries in
some of the battery holders to match the requirements of your device. AAA dummy batteries are available from a number of online
suppliers.
For each configuration, the following table indicates the cells that should contain a dummy battery or a real battery. Figure 7 shows the
location number of each cell (also shown on the bottom of the PCB.)
Figure 7. Cell Location Numbers
Figure 8. Twelve-cell Configuration Example
Table 2. Cell Connections for all Configurations
Number of cells 3 4 5 6 7 8 9 10 11 12 13 14
Device MC33772 MC33771
Jumper J4 Pins 1—2 Pins 2—3
Cell1 Batt Batt Batt Batt Batt Batt Batt Batt Batt Batt Batt Batt
Cell2 Batt Batt Batt Batt Batt Batt Batt Batt Batt Batt Batt Batt
Cell3 Short Short Short Batt Batt Batt Batt Batt Batt Batt Batt Batt
Cell4 Short Short Batt Batt Batt Batt Batt Batt Batt Batt Batt Batt
Cell5 Short Batt Batt Batt Short Short Short Short Short Short Short Batt
Cell6 Batt Batt Batt Batt Short Short Short Short Short Short Batt Batt
Cell7
Not Configurable
Short Short Short Short Short Batt Batt Batt
Cell8 Short Short Short Short Batt Batt Batt Batt
Cell9 Short Short Short Batt Batt Batt Batt Batt
Cell10 Short Short Batt Batt Batt Batt Batt Batt
Cell11 Short Batt Batt Batt Batt Batt Batt Batt
Cell12 Batt Batt Batt Batt Batt Batt Batt Batt
Cell13 Batt Batt Batt Batt Batt Batt Batt Batt
Cell14 Batt Batt Batt Batt Batt Batt Batt Batt
Short Insert a 0 V battery or short the battery holder Batt Insert a real battery
1
2
3
4
5
6
7
8
9
10
11
12
13 14