D E M O 9 S 0 8 S F 4
J U N E 9 , 2 0 0 9
U S E R G U I D E
6
REFERENCES
The following reference documents are available on the CD or DVD provided with this board in
Acrobat Reader format. These documents are also available at www.axman.com/support.
DEMO9S08SF4_UG.doc
DEMO9S08SF4 User Guide (this document)
DEMO9S08SF4_SCH_A.pdf
DEMO9S08SF4 Schematic Rev. A
DEMO9S08SF4_Silk_A.pdf
DEMO9S08SF4 Top Silk, Rev A
DEMO9S08SF4_Assy_A.pdf
DEMO9S08SF4 Default Shunt Placement
DEMO9S08SF4.zip
DEMO9S08SF4 Demo Application
MEMORY MAP
Figure 1 below shows the default memory map for the MC9S08SV16 and the MC9S08FL16
immediately out of reset. Refer to the MC9S08SF4 Reference Manual (RM) for further details.
Figure 1: Memory Map
$0000
$007F
Direct Page Registers
$0080
$00FF
RAM
128 bytes
$0100
$017F
Unimplemented
$1800
$185F
High Page Registers
$1860
$EFFF
Unimplemented
$D000
$FFFF
FLASH
4096 bytes
NOTE:
The memory map above applies to the MC9S08SV16 and MC9S08FL16
microcontrollers
SOFTWARE DEVELOPMENT
Software development requires the use of a compiler or an assembler supporting the HCS08
instruction set and a host PC operating a debug interface. CodeWarrior Development Studio
for Microcontrollers is supplied with this board for application development and debug. Refer
to the supporting CodeWarrior documentation for details on use and capabilities.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from