NXP Semiconductors
AN11268
Quick startup guide for POS Development Kit OM5597/RD2663
AN11268
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.0 — 2 September 2014
242410
8 of 17
Fig 7.
Payment Card Info without Authentication
2.2.2 Closed Loop Payment
For demonstrating the Closed Loop Payment showcase you need the MIFARE DESFire
Card, included in the POS package, as well as a MIFARE SAM V2.6 [12] which is
available separately.
This showcase has a similar workflow as described in section 2.2.1 but this time the
communication is secured by the SAM.
Therefore plug in the SAM into one of the SAM Slots and power up or reset the reader.
Then proceed as described in section 2.2.1.
During the reset of the card, an application with restricted access rights is stored on the
card. When calling the CARD INFO sub-menu the text “NXP DESFire Auth” is displayed
as shown in Fig 8.
Fig 8.
Payment Card Info with Authentication by SAM
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
