nxgtechnology.com
1
Congratulations on your purchase of the NXG Technology NX-SOUNDBAR-40 Stereo
Sound bar! Like all NXG products, great care has been taken in its design. A
combination of advanced engineering and state-of- the-art materials will provide
you with years of listening pleasure.
The NX-SOUNDBAR-40 allows you to play stereo audio from any Bluetooth enabled
device including TVs, Smart Phones, Tablets, or any device with an analog or optical
output.
IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.
Read & Keep these Instructions.
1. Do not use the Sound bar near water or where it could be exposed to water.
2. Clean only with a dry cloth (microfiber works best).
3. Do not block any ventilation openings.
4. Do not install near heat sources like radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
5. Do not defeat or bypass the polarization or grounding of the Plug. A polarized plug has
two blades with one wider than the other. The wide blade is provided for your safety.
When the provided plug does not fit into your outlet, consult an electrician for
replacement of the outlet.
6. Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from the sound bar
7. Unplug this apparatus during lightning storms or when unused for long periods of time.
8. Refer all servicing to qualified service personnel.
FCC Information
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna - Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Modifying or tampering with your system’s internal components can cause a malfunction
and will invalidate the system’s warranty and void your FCC authorization to operate it.
