manualshive.com logo in svg

NW Explorations Konocti Bay, Руководство по эксплуатации, Страница: 2 / 60

Поделиться
Скачать
NW Explorations Konocti Bay Скачать руководство пользователя страница 2

2

 | 

KOnOcTi bAy OperATing MAnuAl 

 NW Explorations 

Warning!

This notice is a part of this manual, and is placed here to warn you as an owner, charter guest, crew member or 

passenger on this vessel that the author of this manual assumes no responsibility for any errors or omissions. 

He represents only that writings and illustrations herein represent his “best efforts” to provide a comprehensive 

overview of the vessel. So that it can be operated by a person who has the necessary experience and/or training 

to operate such a vessel given the additional information herein. 

You should be aware that this operating manual is provided as a convenience to the owner, charter guests, crew 

members and passengers on this vessel. It is not complete in every detail. Given the complexity of this boat and 

its systems, there is no way that all conditions, contingencies, and operating details can be covered, both because 

of space limitations and because of ordinary oversight as contingencies are speculate upon by the author. 

Likewise, it is possible either through oversight and/or changes in the vessel as a result of additions, modifications 

or deletions to or of the equipment since publication of this manual. Items discussed will operate differently than 

described, be absent from the vessel, or be added to the vessel without discussion in this volume.

As a vessel owner, charter guest, crew member or passenger on this vessel, you are here at your own risk, and 

the author of this manual has no responsibility for your actions whatsoever. If you do not feel competent to 

undertake any or all operations detailed herein, do not undertake it/them; get help from a competent person.

Tim Hoving

Содержание Konocti Bay





























































Отзывы:

Нет отзывов