NVX XNET2, Руководство пользователя, Страница: 12 / 24

12
One-of-a-Kind Midwoofer/Amplifier Protection
High-Fidelity Tweeter Protection
Although woofers are larger and much more robust than the tweeters they complement, you can still experience the occasional
blown midwoofer due to misuse, improper setup, or even an unexpected voltage spike. When this happens the inherent construction of
the low-pass filter will cause the amplifier power to feed back into the amp, causing a potential short circuit. Our engineers
included a fuse in series with the low-pass filter; in the rare event your midwoofer should blow, this fuse will pop and cut off the
power flowing back to the amp. The NVX X-Series is the only component system on the market that offers protection
for your amplifier.
To protect our tweeter, we adapted a design commonly found in high-powered pro audio speakers. The key to this protection
feature is an extremely durable bulb which increases in resistance when more power is run through it. We chose to use this
bulb instead of the traditional polyswitch to preserve the fidelity of the music. We also included a fuse and resistor in an
innovative circuit to offer increased protection for the tweeter and the bulb. If the power begins to exceed the capacity of the
tweeter, the bulb will increase in resistance and limit the power. If the power begins to exceed the capacity of the bulb, the
fuse will blow and send all the power through the resistor; this will quiet the tweeters significantly, notifying you that there is
an issue while protecting all the components. With NVX, a power spike just requires a replacement fuse, not a replacement
tweeter.