NVX MVPA1 Скачать руководство пользователя страница 4

3

NVX

 

MVP

SAFETY INFORMATION

INSTALLATION

●  Please read and understand all instructions before attempting to use or install the amplifier. Damage caused by misuse is not covered under warranty.
●  This unit is designed for use with 12VDC systems with negative ground only.
●  Use only the supplied mounting hardware for a safe and secure installation.
●  Adjust the volume to a safe and comfortable level when operating the motor vehicle.
●  Never pour liquids on or near the amplifier, or place the product into a wet/moist environment. If liquid accidentally comes in contact with the 

amplifier, disconnect all power and ground connections immediately.

●  Clean the unit with a soft, dry cloth only. Never use chemicals or solvents such as alcohol or household cleaner.

STEP 1: MOUNTING THE AMPLIFIER

To ensure optimal performance and maximum longevity, the amplifier 

should be mounted so there is suitable ventilation.
Ideal locations include under the seat, in the trunk, or any other location 

which provides adequate air space to keep amplifier cool. Due to the 

potential temperature of the heat sink, it is recommended that you do 

not mount the amp directly to fabric or vinyl material.
Once you’ve found a suitable location that provides ventilation and will 

keep the amplifier dry , mount the amplifier using the included mounting 

tabs. Make sure the amplifier is mounted securely.

STEP 2: MAKING POWER & GROUND CONNECTION

Be sure to use proper gauge wire for all power/ground connections. A 

minimum 10 gauge wire is recommended. For the best results, using an 

NVX amplifier installation kit is recommended.

GROUND: 

Prepare the chassis ground by clearing any paint, dirt and 

grease from the metal surface. Connect a “ground” wire directly to the 

chassis of the vehicle within 30 inches of the amplifier using a non-

anodized screw and a star washer , and connect the other end to the 

ground terminal. The ground should be kept as short as possible, and 

should never exceed 30 inches.

Ideal Locations

Install where there 

is ventilation

to keep amp cool

Ground

Содержание MVPA1













Отзывы: