![NVT NV-EC1701U Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/nvt/nv-ec1701u/nv-ec1701u_installation-manual_1721247008.webp)
Page 8 of 14
888.901.3633 | +44 (0) 208 977 6614
www.nvtphybridge.com
Copyright © 2017 NVT Phybridge
2017/11
WIRE TYPE AND DISTANCE CP
50 Watt IP Camera
50 Watt IP Camera
Ethernet over Coax EoC Transceiver
NV-EC1701
Ethernet over Coax EoC Transceiver
NV-EC1701
55VDC
Power Supply
55VDC Power Supply
Ethernet over Coax EoC T
ransceiver
NV-EC1701
Cat5
NVR
LAN/WAN
Cat5
Cat5
BNC “T”
See Wire Distance Chart on page 9
13,400 ft
8,300 ft
6,800 ft
(4,085 m)
(2,500 m)
(2,070 m)
RG-11
RG-6
RG-59/U
14 AWG
18 AWG
20 AWG
55VDC
55VDC
55VDC
60W
60W
60W
Figure 4 - Alternate Power Supply Location
The NV-EC1701 has a power inlet connector that receives 55 volts from an external Class 2 SELV desk-style power
supply.
Power is distributed to:
1) the transceiver’s internal electronics;
2) the RJ45, provided the connected camera or other device provides the appropriate 27K ohm PoE ‘discovery signature’.
+55V power is provided on pins 1&2 and 5&4, while 3&6 and 7&8 are at 0 V. The use of all four wire-pairs ensures
maximum distance, even for high-power loads, such as P/T/Z cameras.
3) the coax cable, where it is used by the control-room NV-EC1701.
For fault/safety, never use more than two 60 watt power supplies within a network, and never exceed 120
watts, total.
Complete Installation Guide
Model NV-EC1701U
EoC Ethernet over Coax Transceiver
with PoE, PoE+, or High Power PoE