Model NV-EC1701 EoC Ethernet over Coax Transceiver
with PoE, PoE+, or High Power PoE
TECHNICAL SPECIFICATIONS
Page 10 of 14
R J 4 5 E T H E R N E T I N T E R F A C E
Connectivity:
RJ45, auto-crossover
Wire type:
4-pair Cat5 or better
Distance:
up to 328ft (100m)
Speed:
10/100 Base T, half/full duplex, auto-negotiation
auto MDI/MDIX cross-over
Latency:
3mS
Data throughput:
85Mbps ±10% useable bandwidth per network
Example: Four megapixel cameras, all sharing one
coax network, each sending 20Mbps video stream(s).
Power Output:
This Power Sourcing Equipment (PSE) supports
Powered Devices (PDs) that are compatible with
IEEE 802.3af/at, or PDs that draw up to 60 watts*.
For maximum power/distance, 48 to 56 VDC appears on
all eight RJ45 pins, and are current-protected
and transient-protected.
P O W E R C O N S U M P T I O N
Consumption per transceiver: 3.0 W @ 10 to 56VDC
Total system consumption:
= total consumption of transceivers
+ total consumption of PDs (entry station)
+ total power dissipated in the wire
C O A X B U I L D I N G W I R I N G I N T E R F A C E
Connectivity:
BNC, RG-59/U or similar
One control room EoC transceiver may support
multiple* remote EoC transceivers
Impedance:
25 to 100
Ω
Distance:
see pages 8-9
Transmission technology:
OFDM, 128-bit AES encryption
* I M P O R T A N T N O T E :
Distance will often be shorter due to power supply capacity and
wire voltage-drop. See Maximum Per-Camera Wire Distance Chart
on page 8.
For fault /safety protection, never use more than
two power supplies within a network system.
L E D S T A T U S I N D I C A T O R S
Power:
Blue “Power On”
BNC Interface:
Green “Link”
RJ45 Interface:
Green “Link”
M E C H A N I C A L / E N V I R O N M E N T A L
Transceiver body dimensions:
5.1 in (131mm) long
(excluding connectors)
1.3 in (33mm) high
1.5 in (38mm) wide
Transceiver weight:
5.1oz (145g)
Operating and storage temperature: -40°F to 185°F (-40°C to +85°C)
20 to 85% RH non-condensing
Transient Immunity:
5x20µS 3000A, 6000V
ESD 20KV, 200pF
P O W E R S U P P LY
Power supplies are external inline, with an IEC380-C14 power inlet
and 6ft (1.8m) line-cord. Input voltage is 100 ~240VAC 50-60Hz.
A molded P1J 5.5mm barrel connector provides Class 2 (SELV)
regulated output with one of these three ratings:
Use only the power cord provided with the
unit or equivalent UL approved type SPT-2,
SVT, or SJT, 18/3 AWG 100~240VAC, 1A
60°C Max. 15ft (4.5m) long. One end with
IEC380-C13 appliance coupler and the
other end with NEMA 1015P or equivalent
for your country.
60W power supply body dimensions:
4.90 in (125mm) long
1.25 in (32mm) high
2.00 in (50mm) wide
60W power supply weight:
10.6oz (300g)
90W power supply body dimensions:
5.70 in (145mm) long
1.25 in (32mm) high
2.36 in (60mm) wide
90W power supply weight:
1 lb (450g)
Power supply operating temperature: -22°F to 122°F (-30°C to +50°C)
20 to 85% RH non-condensing
Power supply storage temperature:
-40°F to 185°F (-40°C to +85°C)
0 to 95% RH non-condensing
Transient Immunity:
5x20µS 3000A, 6000V
ESD 20KV, 200pF
Power cord weight:
5.5oz (156g)
R E G U L A T O R Y
UL Listed to IEC/UL 60950-1 Complies with FCC part 15B limits
Specifications subject to change without notice.
+48 VDC 60W
+56VDC 60W
+56VDC 90W
RoHS
