Technical Specifications
Video
pass-through
Power Output
3 Position
24VAC, OFF or 28VAC
Voltage Switch
Per-channel switch
selectable
Current
1 Amp per channel
16PS10-PVD
10 Amps aggregate
Protection
Automatic resetting thermistor
Connectors and Impedance
UTP input
RJ45 100 ± 20 ohms
UTP output
RJ45 100 ± 20 ohms
LEDs
Power
Blue
Channel Status
See chart
Environmental
Temperature
0 to 50°C (32 to 122°F)
Humidity
0 to 95% non-condensing
Transient
per ANSI / IEEE687 C62.41
Immunity
Power Input
IEC380 Inlet
Power Cord
IEC380 AC line power receptacle for use
with removable cords. Use only the power
cord provided with the unit or equivalent
UL approved type SJT or SVT, 18AWG,
125/250V, 5A 60 deg.C, Max. 4,5m long;
One end with NEMA 5-15P. Other end with
appliance coupler.
Do not defeat the third pin earth ground
NV-4PS10-PVD
Voltage
115/230 VAC
Frequency
50/60 Hz 1.25 Amp
Wattage
125 W
Heat
50 BTU/Hr (power supply only)
420 BTU/Hr (power supply
with cameras)
NV-16PS10-PVD
Voltage
115/230 VAC
Frequency
50/60 Hz 3.0 Amp
Wattage
325 W
Heat
125 BTU/Hr
(power supply only)
1,200 BTU/Hr
(power supply with cameras)
Fuse
5 x 20 mm Type T
NV-4PS10-PVD 2.5Amp
NV-16PS10-PVD 5.0 Amp
A spare fuse is located inside the fuse holder.
Mechanical (Excluding brackets and connectors)
Weight
NV-4PS10-PVD 3,14kg (7.0 lbs)
NV-16PS10-PVD 10kg (22 lbs)
Dimensions
43 cm wide x 4,5 cm high x 20 cm deep
17 in wide x 1.7 in high x 8.125 in deep
Accessories
NV-4PS10-PVD
-Rubber feet for desk applications (attached)
-Hole cutouts in bottom for wall mount
-Power cable IEC power cord 215cm (7ft)
-NV-4PSRMBK (rack mount kit) purchased
separately
NV-16PS10-PVD
-Mounting: Rackmount “L” brackets for front
or rear installations; rubber feet for desk
applications
-Rack screws (4) 12-24 x ¾” Phillips Pan Head
-Power cable IEC power cord 215cm (7ft)
-Optional Mounting Support Bracket Kits:
Model NV-RMBK (rear mount kit) purchased separately
Model NV-WMBK (wall mount kit) purchased separately
Agency
These NVT products are listed and/or conform to the fol-
lowing certifications and directives:
UL Listed to UL2044 or UL/IEC60065 cUL
Listed to CAN/CSA22.2 No.1 for Canada CE Mark
under EMC and low voltage directives for
the European Union.
Customer Support
If you are experiencing problems, attempt to simplify your
setup. Test each cable segment separately. For example,
test the camera and monitor together without the other
equipment. Then add in the NVT transceivers back-to-
back. Test each segment of a long cable run independently.
Attempt to isolate the problem.
NVT customer support can be reached 8:00 AM to 5:30
PM Monday through Friday.
US office: (+1) (650) 462-8100
US FAX: (+1) (650) 326-1940
UK office: (+44) 0208 977 6614
UK FAX: (+44) 0208 973 1855
[email protected] • nvt.com
Returns
Please call before returning units to NVT. Returned mate-
rials must have a “Returned Materials Authorization”
(RMA) number from NVT marked on the outside of the
shipping carton.
Limited Lifetime Warranty
NVT warrants that the product conforms to NVT’s applica-
ble published specifications and is free of defects for the
life of the product. There shall be no other warranties,
express, statutory, or otherwise, including any implied
warranty of merchantability, of fitness, or any other obliga-
tion on the part of NVT with respect to any of the products.
In the event that any of the products is damaged, altered,
or modified without the express written consent of NVT,
any warranty for those products will cease and NVT will
have no further liability as it pertains to those products.
NVT assumes no responsibility for damages or penalties
incurred resulting from the use of this product in a man-
ner or location other than for which it is intended.
NVT’s liability under any warranties shall be discharged
by replacing or repairing any part or parts which do not
conform to the applicable warranty under normal and
proper use. NVT’s liability with respect to any product
shall not exceed a refund of the price received by NVT
for that product, and in no event shall NVT have any
liability for any incidental, consequential, special, or
indirect damages.
Some states do not allow the exclusion or limitation of
special, incidental, or consequential damages, so the
above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state.
Specifications subject to change without notice.
Copyright © 2009 NVT, Inc. 451-1600-4-A
