Quick Install Guide
PN: 451-2010-003-A
2
4.
Mount power supply behind switch using cable tie secured through slots in base of rack. Orient the power
supply such that the AC inlet connector faces the back of the rack.
5.
Connect power supply barrel connector to power jack at back of switch
6.
Insert AC power cord into AC inlet connector on power supply.
7.
Mount unit in 1.5U slot on 19” rack.
8.
Connect AC power cord to AC power outlet.
Technical Support
The NVT Phybridge Technical Support Group is available to assist you with product installation.
Should you experience trouble with this equipment or for repair or warranty information, please contact NVT Phybridge Inc. at
+1 905.901.3633 or
