NVision NV8288 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 86

background image

ii

Rev 1.3 • 21 Oct 08

NV8288 and NV8288-Plus Digital Video Routers

—

User’s Guide

•

Revision

: 1.3

•

Software Version

: -none-

•

Part Number

: UG0003-03

• Copyright: © 2008 NVISION, Inc. All rights reserved.

• No part of this manual may be reproduced in any form by photocopy,

microfilm, xerography or any other means, or incorporated into any information retrieval sys-
tem, electronic or mechanical, without the written permission of NVISION, Inc.

• The information contained in this manual is subject to change without notice or obligation.

• All title and copyrights as well as trade secret, patent and other proprietary rights in and to the

Software Product (including but not limited to any images, photographs, animations, video,
audio, music, test, and “applets” incorporated into the Software Product), the accompanying
printed materials, and any copies of the Software Product, are owned by NVISION. The Soft-
ware Product is protected by copyright laws and international treaty provisions. Customer shall
not copy the printed materials accompanying the Software Product.

Notice

The software contains proprietary information of NVISION Inc.; it is provided under a license
agreement containing restrictions on use and disclosure and is also protected by copyright law.
Reverse engineering of the software is prohibited.

Due to continued product development, the accuracy of the information in this document may
change without notice. The information and intellectual property contained herein is confidential
between NVISION and the client and remains the exclusive property of NVISION. If you find any
problems in the documentation, please report them to us in writing. NVISION does not warrant that
this document is error-free.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.

Declaration of Conformance (CE)

All of the equipment described in this manual has been designed to conform with the required
safety and emissions standards of the European Community. Products tested and verified to meet
these standards are marked as required by law with the CE mark. (See

Symbols and Their Mean-

«
1
2
3
4
...
»

Содержание NV8288























































































Отзывы:

Нет отзывов

Похожие инструкции для NV8288

Бренд: TAMS Страницы: 28

Бренд: Fantech Страницы: 4

Sierra Pro XL 1616V3

Бренд: Kramer Страницы: 2

Бренд: Intermatic Страницы: 1

Бренд: LevelOne Страницы: 17

Бренд: Omron Страницы: 16

Бренд: DAB Страницы: 56

ProConnect PS2KVM2

Бренд: Linksys Страницы: 17

Бренд: Xantech Страницы: 4

CT.TS005.003902

Бренд: Talkswitch Страницы: 309

MMAC-Plus 9T125-24

Бренд: Cabletron Systems Страницы: 36

Бренд: A-Neuvideo Страницы: 15

Бренд: Lantech Страницы: 29

Бренд: TRENDnet Страницы: 2

Бренд: Leaksafe Solutions Страницы: 12

Бренд: Kramer Страницы: 2

IDS-105FE Series

Бренд: Perle Страницы: 2

Бренд: Goobay Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды