Nvidia Quadro Workstation, Руководство пользователя

Страница: 68 / 253

56 Quadro Workstation User’s Guide
Chapter 4
Using nView Multi-Display Settings
the secondary display when its resolution is set to less than the value set on the
primary display.
Procedure
Follow these steps to enable Virtual Desktop:
1
From your Windows desktop, right click to view the Windows desktop menu,
then click
Properties > Settings > Advanced and then the NVIDIA GPU tab.
2
From the NVIDIA menu, click the nView Display Settings option.
3
From the nView Modes list, select Clone and click Apply .
Note: If you just switched to Clone from Dualview, you’ll need to follow the
prompts to restart your computer. Then, when you have returned to your
desktop, go to the nView Display Settings page and select Clone from the
nView Modes list and click Apply .
From the nView Display Settings page, right click display image (i.e., 1a or 1b ) to
display the pop-up menu and click Change Resolution ( Figure 4.16 ). The Screen
Resolution & Refresh Rates page appears, as shown in Figure 4.17 .
Figure 4.16
nView Clone Mode with Virtual Desktop Enabled — Disabling Panning
Click Change Resolution
from the context menu
of your secondary display.
QuadroGuide_.book Page 56 Monday, April 3, 2006 12:21 PM