NVIDIA Corporation
171
Appendix A
Using Two NVIDIA GPU-Based Graphics Cards (Non-SLI Configuration)
Enabling nView Span and Clone Modes — Detaching the
Secondary Display
Note:
In the following steps, we’ll switch from Dualview to Span or Clone mode for
each of the two NVIDIA GPU-based graphics cards. You will notice that the
secondary displays become detached (disabled) because nView Span and
Clone modes do not detect the secondary display as separate displays.
1
Right click on either display image
2
or
4
, representing the GeForce4 MX-based
graphics card.
2
Click
Properties
and then click the NVIDIA GPU-labeled tab to open the
associated NVIDIA GPU (GeForce4 MX) page.
3
Click the
nView Display Settings
menu option.
4
Click the nView Modes list and select
Horizontal Span
, then click
Apply
/
5
Wait while the displays adjust modes. The resulting Windows Display Properties
Settings page and desktop are shown in
Figure A.7
Display Properties Settings —
4
Displays with
2
Attached
4 MX 420
nViewGuide_.book Page 171 Thursday, September 14, 2006 1:14 PM
