120
User’s Guide
Chapter 7
Configuring Key ForceWare Graphics Driver Features
Hardware Acceleration
Hardware acceleration settings determine advanced rendering options when using
multiple displays and/or graphics cards based on different classes of NVIDIA GPUs.
1
Make sure the
View advanced settings
option is selected from the View list.
2
Select
Hardware acceleration
from the driver settings list.
The available slider settings are shown in
Note:
Multi-display hardware acceleration options do not apply when using
nView Multiview mode in Windows NT 4.0.
•
Single-display mode
: If you have only one active display, this is the default
setting. You can also specify this setting if you have problems with the multi-
device modes.
•
nView Clone/Span mode
is the default setting when your nView display mode is
set to nView Clone mode
or
one of the nView Span modes. If multiple NVIDIA-
GPU based graphics cards in your system are in use with active displays, this
setting is replaced by one of the “multi-display” modes described below.
Figure 7.13
NVIDIA Advanced Driver Settings — Hardware Acceleration
nViewGuide_.book Page 120 Thursday, September 14, 2006 1:14 PM
