34
-v
Version info.
-vsd <string>
Write this string, of up to 208 characters, to VSD when burn.
-y[es]
Non interactive mode - assume answer "yes" to all questions.
Commands affected: all
Note 1. The -mac and -macs options are applicable only to NVIDIA Ethernet adapter and switch
devices.
Note 2. When accessing SwitchX via I2C or PCI, the -override_cache_replacement flag must be set.
Command Parameters
Common FW Update and Query
b[urn]
Burn flash
q[uery]
[full]
Query misc. flash/firmware characteristics, use "full" to get more information.
v[erify]
Verify entire flash
swreset
SW reset the target un-managed switch device. This command is supported only in the In-Band
access method.
sign_with_h
mac
Sign image with HMAC.
Expansion ROM Update:
brom <ROM-file>
Burn the specified ROM file on the flash.
drom
Remove the ROM section from the flash.
rrom <out-file>
Read the ROM section from the flash.
qrom
Query ROM in a given image.
Initial Burn, Production:
Misc FW Image operations:
ri <out-file>
Read the fw image on the flash.
dc [out-file]
Dump Configuration: print fw configuration file for the given image.
dh [out-file]
Dump Hash: print hash file for the given image.
checksum|cs
Perform MD5 checksum on firmware.
timestamp|ts <set|query|reset>
[timestamp] [FW version]
Set/query/reset firmware timestamp.
cache_image|ci
Cache FW image (Windows only).
sign
Sign firmware image file
