manualshive.com logo in svg

Nvidia Mellanox MSB7700-EB2F, Руководство пользователя по оборудованию

Поделиться
Скачать
Nvidia Mellanox MSB7700-EB2F Скачать руководство пользователя страница 10

10

Installation

System Installation and Initialization

Installation and initialization of the system require attention to the normal mechanical, power, and 
thermal precautions for rack-mounted equipment.

The installation procedure for the system involves the following phases:

Step

Procedure

See

1

Follow the safety warnings

English Safety Warnings

2

Pay attention to the air flow consideration within 
the system and rack

Air Flow

3

Make sure that none of the package contents is 
missing or damaged

Package Contents

4

Mount the system into a rack enclosure

19" Systems Mounting Options

5

Power on the system

Initial Power On

6

Perform system bring-up

System Bring-Up of Managed Systems

7

[Optional] FRU replacements

FRU Replacements

Safety Warnings

Prior to the installation, please review the safety warnings. Note that not all warnings may apply to 

all models.

The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Take 
precautions to guarantee proper ventilation in order to maintain good airflow at ambient 
temperature.

This unit is intended for installation in a restricted access location. A restricted access area 
can be accessed only through the use of a special tool, lock and key, or other means of 
security.

Unless otherwise specified, NVIDIA products are designed to work in an environmentally 
controlled data center with low levels of gaseous and dust (particulate) contamination.

The operation environment should meet severity level G1 as per ISA 71.04 for gaseous 
contamination and ISO 14644-1 class 8 for cleanliness level.

Safety warnings are provided here in the English language. For safety warnings in other 
languages, refer to the 

1U Switch Installation Safety Instructions

 document available on 

mellanox.com.

Содержание Mellanox MSB7700-EB2F


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды