27
3-6 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the
chipset registers. These registers control most of the system options in the computer.
CMOS Setup Utility-Copyright(c) 1985-2005 America Megatrends, Inc
Advanced Chipset Features
Advanced Chipset Settings
Item Help
Memory Configuration Press Enter
Hyper Transport Configuration Press Enter
VGA Configurations Press Enter
Menu Level >
↑↓
<->: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1: General Help
F7: Previous values F8: Fail-safe Defaults F9: Optimized Defaults
3-6-1 Memory Configuration
CMOS Setup Utility-Copyright(c) 1985-2005 America Megatrends, Inc
Memory Configuration
Item Help
DRAM Timing Mode Auto
Memory Clk 800MHz
CAS Latency (Tcl) 5.0
RAS/CAS Delay (Trcd) 5CLK
Row Precharge Time (Trp) 5CLK
Min Active RAS (Tras) 18CLK
RAS/RAS Delay (Trrd) 3LK
Row cycle (Trc) 23CLK
Write Recover Time (Twr) 6CLK
Bank Interleaving Auto
Enabled Clock to All DIMMS Enabled
Memelk Tristate C3/ ATLVID Enabled
Memory Hole Remapping Enabled
DCT unganged Mode Always
Power Down Enabled Disabled
DRAM Command Rate 2T
Menu Level >
↑↓
<->: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1:
General Help F7: Previous values F8: Fail-safe Defaults F9: Optimized Defaults
Enable clock to All DIMMS
Enable unused clocks to DIMMS even memory slots are not populated.
Mem CLK Tristate C3/ATLVID
Enabled/Disable MemCLK Tri-stating during C3 and ALT VID.
Memory Hole Remapping
Enable Memory Remappping Arround Memory Hole
DCT unganged Mode
This allows selection of unganged DRAM mode (64-bit width)
Auto=Ganged Mode
Always=Unganged mode
