Nvidia ForceWare, Руководство пользователя программного обеспечения

Страница: 116 / 159

112 MediaShield User’s Guide – Version 4.0
C
HAPTER
3
Using the NVIDIA MediaShield RAID Management Utility
Migrating from RAID 0+1 to RAID 5
The following example shows you how to convert a RAID 0+1 array with four disks to a
RAID 5 array with four disks.
1
Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2
Boot to Windows, launch the MediaShield application, then follow the steps outlined in
“Creating a Stripe Mirroring Array” on page 54 .
When that is done, you should see a screen shot similar to the following:
Figure 3.114
RAID Array Created
3
Click click on “Stripe Mirroring” and select “Convert Array...” as shown in the
following screen shot:
Figure 3.115 Selecting “Convert Array” from the Pop Up Menu