NVIDIA Corporation
Frame Synchronization User’s Guide
– Version 3.0
7
C
HAPTER
2
NVIDIA Frame Synchronization
Detailed Setup Instructions
Set Up the Hardware
1
Start the system, then connect the external source signal to the
House Sync
connector
(BNC) of the graphics card.
2
Check the LED on the connector panel.
•
A green LED means the hardware has detected the timing signal, and you can
proceed to the next step.
An occasional red flash is OK.
•
A red LED means the hardware can’t detect the timing signal.
Check the signal source and correct the problem before proceeding.
illustrates a system that is connected to an external sync source.
Figure 2.2
Example of Genlock Hardware Connections
Sync Source
Server
Connector Bracket
Quadro G-Sync
Quadro FX 3000G
