manualshive.com logo in svg

Nvidia DGX-1, Руководство пользователя, Страница: 88 / 120

Поделиться
Скачать
Nvidia DGX-1 Скачать руководство пользователя страница 88

Maintaining and Servicing the NVIDIA DGX-1

www.nvidia.com

NVIDIA DGX-1

DU-08033-001 _v13.1 | 84

 14.

Follow the instructions in the section 

Restoring the DGX-1 Software Image

 to create

the partitions.

5.5.4. Recreating the RAID 0 Array

After replacing one of the RAID 0 cache SSDs, you need to recreate the RAID 0 array.
If you replaced only the cache and not the operating system SSD, then you can use a
convenient script to recreate the RAID array. The script is part of the DGX-1 software as
of version 2.0.4.
To use the script, you need to get and install the StorCLI utility. For instructions, see the
document 

Using StorCLI to Recreate the NVIDIA DGX-1 RAID 0 Array,

 available from the

Enterprise Services site.

Connect a display (1024x768 or lower resolution) and keyboard to the DGX-1 when
booting the DGX-1 before recreating the RAID array. This is because the system may
halt at the BIOS screen alerting you that the RAID array needs to be configured. Press
C (or whichever key allows you to continue) to complete the boot process. You will
be able to do this only if you are operating the DGX-1 through a direct display and
keyboard connection.

 1.

If you have installed the StorCLI utility, run the script by entering the following on

the command line:

Содержание DGX-1

























































































































Отзывы:

Нет отзывов