Nvidia ConnectX-6 Dx MCX623430MS-CDAB, Руководство пользователя

Страница: 9 / 75

9
Introduction
This is the User Guide for Ethernet adapter cards based on the ConnectX®-6 Dx integrated circuit
device for OCP Spec 3.0. These adapters connectivity provide the highest performing low latency
and most flexible interconnect solution for servers supporting OCP 3.0 used in Enterprise Data
Centers and High-Performance Computing environments.
Important Note:
In some of the OCP 3.0 prototype samples, the insertion force that is required to install the card
into a particular PCI connector may exceed the maximum insertion force that is allowed by the
connector’s spec. NVIDIA is updating the OCP 3.0 cards to ensure the proper insertion process.
The following table provides the ordering part number, port speed, number of ports, and PCI Express
speed.
Products Overview
ConnectX-6 Dx 25GbE Adapter Cards for OCP 3.0
OPN MCX623432AN-
ADAB
MCX623432AC-
ADAB
MCX623432AE-
ADAB
MCX623432AS-
ADAB
Network Connector
Type
Dual-port SFP28
Dual-port SFP28 Dual-port SFP28 Dual-port SFP28
Ethernet Data Rate 10/25 Gb/s
PCI Express
Connectors
PCIe Gen 3.0 / 4.0 x16
SERDES @ 8.0GT/s / 16.0GT/s
Dimensions
Small Form Factor (SFF) OCP 3.0
4.52 in. x 2.99 in (115.00mm x 76.00mm)
Retention Mechanism Thumbscrew (Pull Tab) Bracket
RoHS RoHS Compliant RoHS Compliant RoHS Compliant RoHS Compliant
IC Part Number MT28928A0-XCCF-CE MT28928A0-XCCF-
CE
MT28928A0-XCCF-CE
MT28928A0-XCCF-CE
Host Management
✔ ✔ ✔ ✔
Crypto -
✔ ✔
-
Secure Boot
✔ ✔
-
✔
Device ID
4125 for Physical Function (PF)
4126 for Virtual Function (VF)
Please note the following OPNs are shipped with an assembled thumbscrew (pull tab)
bracket. For other retention mechanism brackets, please contact NVIDIA.
