Nvidia C1060 - Tesla Computing Processor, Руководство по установке

Страница: 15 / 34

9
Driver Installation
This section contains the instructions to install the software drivers
within a Windows environment or within a Linux environment
Windows Installation
The required software for the Tesla C1060 includes the CUDA
drivers, which should also serve as the driver for the NVIDIA
discrete or on-board graphics processor. It is recommended that
driver installation be carried out either using the installation CD
that comes with the Tesla C1060 or by downloading the most
recent CUDA drivers available at http://www.nvidia.com/cuda.
Note: Use only drivers that are designated to support Tesla C1060.
Not all NVIDIA graphics drivers support the Tesla C1060.
Power up your computer 1.
If the LEDs on the Tesla C1060 board turn red, then you have
likely failed to connect the auxiliary PCI Express power connectors
properly. Go back to the hardware installation steps and re-check the
connectors for proper installation. Reconnect if necessary and power
up again.
The following table is a list of different possible scenarios as well as
the resulting behaviors.