16
DOS prompt. Why?
Explain and Suggestion:
Windows® 95
Inadvertently, certain configuration files (e.g., msdos.sys, and
command.com) have been changed in the system. Proceed to correct
that, is re-boot the system with a system (Windows® 95) formatted floppy
diskette.
There are many reasons to causing the system booting-up with un-
appropriated steps. Base on Microsoft support wizard on their WEBsite,
there are many technical articles to help users with this subject, such as
troubleshooting with VXD errors, virus, Fatal exceptions, etc., more details
cover on each issue are descriptive and familiar with, and exclusively
further to our support.
Q:
System hangs-up after installing video driver.
Explain and Suggestion:
Today, most video drivers are developed for 32-bit processing and may
require a channel to Code/Decode. Conflict between device drivers and
TSR (terminate-and-stay-resident) programs will inverted the display, and
are particularly effectual at crashing computer. The most
effective way to
check for conflicts is to replace with the original video driver, or delete and
re-install the current video driver to the system.
Accomplishing IRQs (Interrupt Request Query) settings or
troubleshooting the conflicts on hardware source may necessary. Most
AGP video cards designed for Plug-n-Play, that means video card IRQ's
setup which controls by main board’s (motherboard) circuitry and BIOS.
Physically pulling out other devices from system, and re-starts the
computer. Confirm and modify your IRQ addresses with qualified
computer technician.
Q:
Multiple images or unreadable screen after loading video driver.
Explain and Suggestion:
There are a variety of reasons why the display might be distorted. One
common reason is a monitor mis-match. Some older multifrequency
monitors are unable to switch video modes without being turned off, then
turned on again.
If the problem occurring in windows, make sure that you have loaded that
proper video driver, and that the driver is compatible with the monitor
