13
above the expansion slot connector on the motherboard.
Then press the adapter into place, completely. Use the
(remaining) screw you removed to secure the adapter-
retaining bracket in place.
6.
Replace the computer cover. Secure the cover with the
mounting screws you removed in Step 3.
You have now completed the installation of your new graphics
adapter on your system.
<
Upgrade Steps:
Add or change your video adapter to an existing system,
you may proceed a few steps before you install the new
hardware and software(video display driver). The followings
are some of the considers:
1. To change a new adapter, please remove the existing
video driver, or replace it to SVGA driver from
Windows®98/Me system before you remove the
existing hardware.
2. To added a new adapter, ensure the mainboard that
has available IRQ for new devices, and there is no
conflict between the others.
3. If you try add this video adapter to an ALL-IN-ONE
mainboard (which video port built-in already), then you
have to disable that port first. Otherwise, that will be a
problem for the new video adapter setup.
4. The driver installation for system upgrade as same as
below, if error occur when you proceed step 1,2 or 3,
please consult with your system dealer or the existing
hardware manufacturer support.
