12
(remaining) screw you removed to secure the adapter-
retaining bracket in place.
6.
Replace the computer cover. Secure the cover with the
mounting screws you removed in Step 3.
You have now completed the installation of your new graphics
adapter on your system.
<
Upgrade Steps:
To add or change your video adapter to an existing
system, you may proceed a few steps before you install
the new hardware and software(video display driver). The
following are some of the considerations:
1. To change a new adapter, please remove the existing
video driver, or replace it with a SVGA driver from
Windows®98/Me system before you remove the
existing hardware.
2. To add a new adapter, ensure the mainboard that has
available IRQ for new devices, and there is no conflict
between the others.
3. If you try adding this video adapter to an ALL-IN-ONE
mainboard (which video port built-in already), then you
must disable that port first. Otherwise, that will be a
problem for the new video adapter setup.
4. The driver installation for system upgrade is as the
same as below, if an error occurs when you proceed
step 1,2 or 3, please consult with your system’s
dealer or the existing hardware manufacturers
support.
Software Installation
Software Installation
