DESCRIPTION
nVent RAYCHEM RayClic-S Splice Kit
nVent RAYCHEM RayClic-T Tee and End Seal Kit
nVent RAYCHEM RayClic-X Cross and End Seal Kit
These kits are for use with nVent RAYCHEM IceStop, XL-Trace
and HWAT heating cables. The connection is designed to
be strapped to the pipe, or wall mounted. These installation
instructions should be used in conjunction with the IceStop,
XL-Trace, and HWAT System Installation and Operation Manuals.
For technical support, contact your nVent representative or call
nVent (800) 545-6258.
TOOLS REQUIRED
• TORX T20 screw driver
• Utility knife
• Wire cutters
OPTIONAL ACCESSORIES
(NOT INCLUDED IN THIS KIT)
• RayClic-SB-02 Wall mounting bracket
• RayClic-SB-04 Pipe mounting bracket
This component is an electrical device that
must be installed correctly to ensure proper
operation and to prevent shock or fire. Read
these important warnings and carefully follow
all the installation instructions.
• To minimize the danger of fire from
sustained electrical arcing if the heating
cable is damaged or improperly installed,
and to comply with the requirements of
nVent, agency certifications, and national
electrical codes, ground-fault equipment
protection must be used. Arcing may not be
stopped by conventional circuit breakers.
• Bus wires will short if they contact each
other. Keep bus wires separated.
• Keep components and heating cable ends
dry before and during installation.
• The black heating cable core is conductive
and can short. It must be properly insulated
and kept dry.
• Component approvals and performance are
based on the use of nVent-specified parts
only. Do not use substitute parts or vinyl
electrical tape.
• Leave these instructions with end user for
reference and future use.
WARNING:
APPROVALS
For HWAT, IceStop, and XL-Trace only
Hazardous Locations: For IceStop (GM-XT) only
Class I, Div. 2, Groups A,B,C,D
718K Pipe Heating Cable
877Z De-Icing and Snow Melting
Not UL Listed with XL-Trace heating cable
for buried piping.
APPROVED
-w
RayClic Connection System
Installation Instructions
