16
Owner’s Manual
OPERATING INSTRUCTIONS (Continued)
ULTIMATE CLEAN with TURBO
Cleans at the highest fan speed for ½ hour and will switch to
"ULTIMATE CLEAN" mode.
1.
Press "ULTIMATE CLEAN". ULTIMATE CLEAN will be lit green.
2.
Press “TURBO”. Default is ½ hour and can adjust from
1 to 2 hours.
3.
Press “TURBO” a fourth time to turn off.
FAN SPEED
Adjust from 6 speeds (LOW to HIGH).
1.
Press "FAN SPEED" to adjust.
2.
To go back to the lowest level of fan speed, continue to press
"FAN SPEED" until the first bar is lit.
SLEEP MODE
When in Sleep Mode the LED lights will be off but the fan will
still be active. Adjust the fan speed prior to going into
Sleep Mode.
1.
Manually adjust FAN SPEED.
2.
Press and hold "FAN SPEED" for 2 seconds to activate
SLEEP MODE.
•
Unit will run under the fan speed that was previously selected.
3.
To turn off Sleep Mode, press any button.
Note:
ULTIMATE CLEAN and TURBO will work during Sleep Mode.
TIMER
Use the TIMER function to choose the duration of operation.
1.
Press “TIMER”. The bar next to ½ hour will be lit.
•
There are 6 preset times to choose from.
2.
Press “TIMER” to increase time.
•
Choose from ½ hour, 1, 2, 4, 8, or 12 hours.
•
After pressing "TIMER" six times, all bars will be lit.
3.
Press “TIMER” once more to turn TIMER off.
ODOR
NO
ODOR
STRONG
ODOR
REPLACE
FILTER 4
CLEAN
FILTER 2
WIFI
AIR
SLEEP MODE
AUTO
ULTIMATE
CLEAN
FAN
SPEED
TIMER
TURBO
HR
CLEAN
DIRTY
POWER
HR
HIGH
LOW
ECO-FRIENDLY MODE
RESET FILTER 2
HOLD FOR 2 SECONDS
RESET FILTER 4
HOLD FOR 2 SECONDS
ODOR
NO
ODOR
STRONG
ODOR
REPLACE
FILTER 4
CLEAN
FILTER 2
WIFI
AIR
SLEEP MODE
AUTO
ULTIMATE
CLEAN
FAN
SPEED
TIMER
TURBO
HR
CLEAN
DIRTY
POWER
HR
HIGH
LOW
ECO-FRIENDLY MODE
RESET FILTER 2
HOLD FOR 2 SECONDS
RESET FILTER 4
HOLD FOR 2 SECONDS
