14
15
GENERAL USE
general use
nuwavenow.
com
ENGLISH
General Use
1. Press
Pulse 1
for short bursts of blending at low power (25%
Power).
•
Press and hold
Pulse 1
for continuous blending. The display
will show “3:00”. Once the button is released, blending will
end.
•
The percentage of power used can be adjusted by holding
Pulse 1 and rotating the dial. The percentage will change in
10% increments.
2. Press
Pulse 2
for short bursts of blending at high power (100%
Power)
•
Press and hold
Pulse 2
for continuous blending. The display
will show “3:00”. Once the button is released, blending will
end.
•
The percentage of power used can be adjusted by holding
Pulse 2
and rotating the dial. The percentage will change in
10% increments.
Icon Setting
For more specialized blending tasks you
can select one of the preset icons with
the dial. Each icon setting has a default
time and RPM.
1.
Turn the dial to your desired icon setting. The LED display will
show the default time.
2.
Adjust the time, if needed, then press
Start/Pause
to begin
blending at your selected setting.
•
If desired, increase or decrease the time at any point while
blending.
Notes:
•
When blending for a long period of time, steam may escape from the
Plunger Cap.
•
Always start with cold liquids when blending. DO NOT add hot
liquids to the blender.
•
Do not fill the Jar above ¾ capacity (42oz.).
0
Pulse
1
Pulse
2
Start
Pause
Getting Started
1.
Turn the red main Power Switch, located on the right side of the
Blender Base, to ON.
•
The
Power
button will flash.
2.
Press
Power
once to turn your Infinity Blender
™
Pro Plus on.
The LED display will show the default time for the selected
setting.
3.
Turn the dial to choose your desired blending function.
4.
Press
Start/Pause
to start blending.
5.
Press
Start/Pause
again to stop blending.
6.
When the Infinity Blender
™
Pro Plus is finished blending, it will
beep 5 times and “0:00” will be displayed.
7.
Press
Power
again and turn the red main Base Power Switch
to OFF to turn your Infinity Blender
™
Pro Plus off.
Time Setting
Use the
Up
and
Down
arrows to increase or
decrease the time on the display.
•
Times are displayed in minutes and seconds.
•
Blending times can be adjusted in 1-second
increments when using any setting.
Example:
Press
Power
. Turn the dial to Ice. “00:15” (15
seconds) will be displayed. Use the Up and Down arrows to adjust
the time. Press
Start/Pause
.
Numbered Settings
For standard blending, you can select your blending speed from
one of the numbered settings between 1 and 10.
1.
Turn the dial to your desired setting between 1 and 10.
2.
Adjust the time, if desired, then press
Start/Pause
to begin
blending at your selected setting.
3.
Adjust the number setting using the dial at any point while
blending, if needed.
Pulse Function
The Infinity Blender
™
Pro Plus offers two Pulse functions where the
power settings are fully adjustable.
00:15
