Nu-Link-Gang
Dec. 23, 2019
Page
21
of 37
Rev 1.00
NU
-LINK
-GA
NG
USE
R MA
NU
AL
Figure 4-4 Nu-Link-Gang Connects to PC
4.5.2 ICP Programming Tool Setting
1.
Choose “Connect”. The window will shows “NuLink connected” when the connection between
programming unit and ICP Programming Tool is built.
2.
Load the firmware image files to the corresponding flash region.
3.
Set the program option. It is necessary to select the “Offline Programming Mode” option.
4.
Click “Start”. The ICP Programming Tool will start loading the firmware image files to the Nu-
Link-Gang.
User needs to repeat section 4.5.1 and 4.5.2 to load firmware image file to every programming unit.
