NuMaker-M483KG
May.
10, 2019
Page
17
of 40
Rev 1.00
N
UMA
K
E
R
-M4
83
K
G
US
E
R MA
NUA
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
System Configuration
2.5
2.5.1 VIN Power Source
Table 2-6 presents the Vin power source.
Connector
Net Name in
Schematic
Comment
NU1 pin8
NU1_VIN
Board external power source, with voltage range from 7
V to 12 V. The voltage regulator UP2 converts the NU1
pin8 input voltage to 5 V and supplies it to NuMaker-
M483KG.
Table 2-6 Vin Power Source
2.5.2 5 V Power Sources
Table 2-7 presents the 5 V power sources.
Connector
Net Name in
Schematic
Comment
ICEJ3
USB_HS_VBUS
ICE USB connector supplies 5 V power from PC to
M483 platform and Nu-Link2-Me.
J2
USB_VBUS
USB connector on NuMaker-M483KG supplies 5 V
power from PC to M483 platform and Nu-Link2-Me.
NU1 pin5
NU1_5VCC
ICEJ3, J2 or NU1 pin8 supplies 5 V power to NU1 pin5.
NU1 pin5 supplies 5 V power to target chip or Arduino
adapter board.
Note:
M483 operating voltage range is from 1.8 V to 3.6
V. Do not connect 5V to VDD.
Table 2-7 5V Power Sources
2.5.3 3.3 V Power Sources
Table 2-8 presents the 3.3 V power sources.
Voltage Regulator
5V Source
Comment
ICEUP1
USB_HS_VBUS
ICEUP1 converts USB_HS_VBUS to 3.3 V and supplies
3.3V to M483 platform
or ICE chip.
UP1
USB_VBUS
UP1 converts USB_VBUS to 3.3 V and supplies 3.3 V
to M483 platform.
Note:
R12 should be connected.
UP1
NU1_5VCC
UP1 converts NU1_5VCC to 3.3 V and supplies 3.3 V to
M483 platform.
Note:
R12 should be connected.
Table 2-8 3.3 V Power Sources
