NuMaker-M258KG
Jan. 15, 2022
Page
36
of 54
Rev 1.00
N
UMA
K
E
R
-M
2
58
KG
US
E
R MA
NUA
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
4.5
Find the Example Project
Use the “Template” project as an example. The project can be found under the BSP folder as shown in
M251_M252_M254_M256_M258_Series_BSP_CMSIS_V3.XX.XXX
SampleCode
Template
GCC
Keil
IAR
Figure 4-7 Template Project Folder Path
4.6
Execute the Project under Toolchains
Open and execute the project under the toolchain. The section 4.6.1, 4.6.2, and 4.6.3 describe the steps
of executing project in Keil MDK, IAR EWARM and NuEclipse, respectively.
4.6.1
Keil MDK
This section provides steps to beginners on how to run a project by using Keil MDK.
Double-click the
“Template.uvproj” to open the project.
Figure 4-8 Warning Message of
“Device not found”
Note:
If Figure 4-8 warning message jumps out, please migrate to version 5 format as shown in Figure
4-9. The
“.uvproj” filename extension will change to “.uvprojx”.