NuMaker-M2354
Dec. 25, 2020
Page
32
of 54
Rev 1.00
N
UMA
K
E
R
-M2
35
4
US
E
R
MA
NU
A
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
Finding the Example Project
Use the “Blinky” project as an example. The project can be found under the BSP folder as shown in
M2354_BSP
SampleCode
NuMaker
Blinky
Keil
IAR
GCC
Figure 4-7 Blinky Project Folder Path
Executing the Project under Toolchains
Open and execute the project under the toolchain. The section 4.6.1, 4.6.2, and 4.6.3 describe the
steps of executing project in Keil MDK, IAR EWARM and NuEclipse, respectively.
4.6.1 Keil MDK
This section provides steps to beginners on how to run a project by using Keil MDK.
1. Double click the
“Blinky.uvprojx” to open the project.
2. Make sure the debugger is
“Nuvoton Nu-Link Debugger” as shown in Figure 4-8 and Figure 4-9.
Note:
If the dropdown menu in Figure 4-8 does not contain
“Nuvoton Nu-Link Debugger” item,
please rework section 4.2.
2
1
Figure 4-8 Debugger Setting in Options Window
