NuMaker-M2354
Dec. 25, 2020
Page
7
of 54
Rev 1.00
N
UMA
K
E
R
-M2
35
4
US
E
R
MA
NU
A
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
1
OVERVIEW
The NuMaker-M2354 is an evaluation board for Nuvoton NuMicro M2354 microcontrollers. The
NuMaker-M2354 consists of two parts, a M2354 target board and an on-board Nu-Link2-Me debugger
and programmer. The NuMaker-M2354 is designed for secure evaluation, prototype development and
validation with power consumption monitoring function.
The M2354 target board is based on NuMicro M2354KJFAE. For the development flexibility, the M2354
target board provides the extension connectors of M2354KJFAE, the Arduino UNO compatible headers
and is able to adopt multiple power supply by external power connectors. Furthermore, the Nuvoton-
designed ammeter connector can measure the power consumption instantly, which is essential for the
prototype evaluation. The M2354 target board also has Wi-Fi connectivity on board and LCD display
panel (COM/SEG) for quick development.
In addition, there is an attached on-board debugger and programmer
“Nu-Link2-Me”. The Nu-Link2-
Me supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-
Link2-Me supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the
programming status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached
from the evaluation board and become a stand-alone mass production programmer.
Figure 1-1 NuMaker-M2354 Board
