NuMaker-M071R1E
Dec. 14, 2020
Page
7
of 46
Rev 1.00
N
UMA
K
E
R
-M0
71
R1
E
U
S
E
R MA
NUA
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
1
OVERVIEW
The NuMaker-M071R1E is an evaluation board for Nuvoton NuMicro M071R1E and M071SE
microcontrollers. The NuMaker-M071R1E consists of two parts: an M071R1E target board and an on-
board Nu-Link2-Me debugger and programmer. The NuMaker-M071R1E is designed for project
evaluation, prototype development and validation with power consumption monitoring function.
The M071R1E target board is based on NuMicro
M071R1E3AE. For the development flexibility, the
M071R1E target board provides the extension connectors of M071R1E3AE, the Arduino UNO
compatible headers and the capability of adopting multiple power supplies. Furthermore, the Nuvoton-
designed ammeter connector can measure the power consumption instantly, which is essential for the
prototype evaluation.
In addition, there is an attached on-board debugger and programmer
“Nu-Link2-Me”. The Nu-Link2-Me
supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-Link2-Me
supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the programming
status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached from the
evaluation board and become a stand-alone mass production programmer.
Figure 1-1 NuMaker-M071R1E Evaluation Board
