NuMaker-M032BTAI
Apr. 19, 2022
Page
7
of 46
Rev 1.00
NUMA
K
E
R
-M0
3
2
B
T
A
I US
E
R M
A
NU
A
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
1 OVERVIEW
The NuMaker-M032BTAI is an evaluation board for Nuvoton NuMicro
M032BT series microcontrollers.
The M032BT series BLE MCU is compliant with the BLE 5.0 standard supporting data rates up to 2
Mbps, offering 2.4 GHz proprietary stacks to achieve more possibility for wireless connectivity and Over-
the-Air (OTA) for firmware upgrade. The NuMaker-M032BTAI consists of two parts: an M032BTAI target
board and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-M032BTAI is designed
for project evaluation, prototype development and validation with power consumption monitoring
function.
The M032BTAI target board is based on NuMicro
M032BTAIAAN. For the development flexibility, the
M032BTAI target board provides the extension connectors, the Arduino UNO compatible headers and
the capability of adopting multiple power supplies. Furthermore, the Nuvoton-designed ammeter
connector can measure the power consumption instantly, which is essential for the prototype evaluation.
In addition, there is an attached on-board debugger and programmer
“Nu-Link2-Me”. The Nu-Link2-Me
supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-Link2-Me
supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the programming
status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached from the
evaluation board and become a stand-alone mass production programmer.
Figure 1-1 NuMaker-M032BTAI Evaluation Board
