N9H26
Mar 15, 2019
Page
4
of 29
Rev 1.01
NUDE
S
IG
N H
MI
-N9H
26
U
S
E
R
M
A
NUA
L
2
NUDESIGN HMI-N9H26 INTRODUCTION
NuDesign HMI-N9H26 uses the ARM926EJ-S CPU core as the target micrprocessor.
NuDesign HMI-N9H26 is similar to other development boards. Users can use it to develop and
verify applications to emulate the real behavior. The NuDesign HMI-N9H26 can be a real system
controller to design users’ target systems, supports USB2.0 Host/Device high speed interface,
microphone, audio headphone out, audio amplifier, speaker out, JTAG interface, SPI Flash and
RS-232 interface.
NuDesign TFT-LCD5 is a LCM display with touch panel adaptor, it is supporting Pixel Format
480(RGB)/272 resolutions.
The NuDesign HMI-N9H26 development connects JTAG port to your target system (via JTAG
adaptor tool) and allows you to program and debug embedded programs on the target hardware.
Figure 2-1 NuDesign HMI-N9H26 PCB Board (Front)
