MuMaker-PFM-NUC472
June 17, 2016
Page
17
of 37
Rev 1.00
N
UMA
K
E
R
-P
F
M
-N
UC47
2
US
E
R M
A
NU
A
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
3
GETTING STARTED
This chapter describes the steps of using the NuMaker-PFM-NUC472 board.
Connect to the PC Host
3.1
Connect the USB Mini-B port (ICEJ1) in Nu-Link-Me to the PC Host as Figure 3-1. The PC Host will
supply 5V power to this NuMaker-PFM-NUC472 board and recognize this board as USB composite
device named as Nu-Link which has both Mass Storage and Virtual COM (VCOM) Port functions. The
Mass Storage function is easy for user to program the bin file to the flash of target chip and user just
only drags and drops the bin file to this Mass Storage disk to update program. The VCOM port
function is used to print some messages on PC API, like Tera Term, through the standard UART
protocol to help user to debug program.
User can check the device status from the
“Devices and Printers” or “Device Manager” in your
“Computer” of OS as shown in Figure 3-2.
After connecting successfully with PC Host, your PC will add-in an extra disk named as
“MBED”, as
shown in Figure 3-3.
Figure 3-1 Connect to PC Host
