8051 ISP by COM Port
3 Software
3.1 Install the Application Program
The application program setup file is contained in the folder [(2) Application Program]. Using the default installation
setting, you will find the item
“Nuvoton Tools \ ISP-ICP Utility, v?.??”
appearing in the Windows START-menu after
the application program is successfully installed.
Note:
ISP-ICP means this application program is used for both the ISP Programmer and the ICP Programmer.
In addition, also for the ISP by COM Port.
3.2 Introduction to the Application Program
©2010 Nuvoton Technology Corporation. All Rights Reserved.
< Revision 5.02 > 8
