8
HEPA Filter replacement
Replace the HEPA filter every 6 - 9 months of usage.
To buy new HEPA Filter, please visit
Cleaning the surface of the housing
1.
Turn off the appliance and unplug the unit from power supply.
2.
Use a soft cloth to clean the surface of the housing.
Troubleshooting
Problem
Possible Cause
Solution
Unit does not power
on
The unit is not properly connected to
power source.
The unit is not turned on.
Check if the power cord is correctly
connected to the power source.
Turn on the unit.
Outlet airflow is
significantly weak
The filters are dirty.
The filters need to be cleaned or
replaced. You can shake slightly the
filters to remove the dust and lint etc
on it.
The filter packaging is not removed.
Please remove the filter concealing
bag.
Product Specifications:
Input Voltage: AC 120V~
Frequency: 60Hz
Rated Power: 40W
Unit Size: 13.0 L x 6.8 D x 19.8 H inch
Unit Weight: 10 Lb 2 Oz
FCC Instructions
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the product.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This product generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
